Template:Connect the Microphone MX202 and STM1

From IVS Wiki
Jump to navigation Jump to search

Connecting and Mounting the Microphone

  1. Asses the drop ceiling to decide best mounting placement for the MX202i. Avoid tiles adjacent to HVAC or fire safety devices.
  2. Drill a hole into the center of the single gang plate using the ½” paddle bit (if not prefabricated).
  3. Measure center of the drop ceiling tile and drill a similar hole with the ½” paddle bit.
  4. Align the single gang plate to the location of the microphone on the drop ceiling tile using a pair of toggle bolts.
  5. Run the MX202i through the ½” hole in the ceiling tile and single gang plate with the rubber stopper to secure the microphone in place and plugging the ½” hole .
  6. Adjust the length of the cable of the microphone to a desirable length, hiding the remainder in the ceiling near the STM-1. Attach the windscreen to the MX202i.
  7. Run the XLR mini cable to the STM-1 location.
  8. Connect the connect the XLR mini to the 4 pin Male XLR adapter.
  9. Strip away a portion of the red and black cables inside the pigtail, revealing the copper wire inside.
    • The microphone will be connected via the input terminals of the STM-1 (Red to +, Black to -, ground to the ground terminal).
  10. Connect the female XLR to the Male XLR adapter
Retrieved from "https://ivs.help/wiki/index.php?title=Template:Connect_the_Microphone_MX202_and_STM1&oldid=6256"