Installing an Axis P5414/P5415 with a Tesira Forte DSP

From IVS Wiki
Revision as of 20:06, 23 April 2020 by IVSWikiBlue (talk | contribs) (Created page with "==Required Parts And Tools== * Axis P5415 or P5415 * T20 Torx security bit * T10 Torx Security bit * Wire Stripper * Wall Dogs (if mounting to concrete) (7/8...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Required Parts And Tools

  • Axis P5415 or P5415
  • T20 Torx security bit
  • T10 Torx Security bit
  • Wire Stripper
  • Wall Dogs (if mounting to concrete) (7/8")
  • Screws and Anchors (7/8")
  • 1/2" paddle bit
  • Toggle Bolts (If mounting mic to drop ceiling tile) (3/16")
  • Drill bit and drill
  • Phillips head drill bit or Phillips head screwdriver
  • Small Flat head screwdriver (#3)
  • Hole Saw (2")
  • B Connectors
  • Stud Finder
  • Cat5/6 Patch Cable (7ft-15ft recommended)
  • Shielded Stranded 22/2 +ground Wire
  • Fish Tape or Glow Rods
  • Biamp Tesira Forte unit
  • Biamp ceiling microphone
Retrieved from "https://ivs.help/wiki/index.php?title=Installing_an_Axis_P5414/P5415_with_a_Tesira_Forte_DSP&oldid=5305"