Deprecated Page - M5525 Shure MX202i W/P

From IVS Wiki
Jump to navigation Jump to search

Required Parts And Tools

  • Axis M5525
  • RDL STM-1
  • Shure MX202WP/C Microphone
  • Wire Stripper
  • Anchors and Screws
  • Phillips head drill bit or Phillips head screwdriver
  • Small Flat head screwdriver
  • Stud Finder
  • 22/2 Gauge Wire
  • Fish Tape or Glow Rod
  • Wind Screen (Inside MX202i Box)

Connecting the STM-

  1. Connect MX202WP/C Microphone to the input of the provided wall plate. Connect 22/2 cable to the audio output of that wall plate. VERY IMPORTANT to make the connections AS diagrammed (see below)
  2. Connect the output 22/2 cable to the input of the STM-1 (Red to +, Black to -, bare wire to ground). Connect 22/2 wire to the power of the STM-1 (red to + and black to -). Connect the other end of that cable to the IO Connectors on the M5525 labeled 12V and GND (Red to 12V and BLK to GND). Using 22/2 cable, connect the red and black to the HI-Z output (red to + black to -). Connect the other end of that cable to the to the IO Connectors on the M5525 labled Audio IN and GND (red to Audio IN and Black to GND)

(NOTE; If there are 2 cameras in the room, duplitcate step 9.1.3 using a long enough cable to get to the 2nd camera. If there are 2 Shure MX202i Microphones, duplicate step 9.1.4.)

Retrieved from "https://ivs.help/wiki/index.php?title=Deprecated_Page_-_M5525_Shure_MX202i_W/P&oldid=2475"