Sending a Configuration to the System: Difference between revisions
Jump to navigation
Jump to search
IVSWikiBlue (talk | contribs) Created page with "=Sending a Configuration and Connecting= # Go to System > Compilation > Compile Active Partition, and make sure all paths are connected properly. # Go to System > Network > S..." |
IVSWikiBlue (talk | contribs) |
||
| Line 1: | Line 1: | ||
=Sending a Configuration and Connecting= | =Sending a Configuration and Connecting= | ||
# Before sending a configuration, the existing or default configuration on the Tesira needs to be cleared from the Forte in the [[Devices and Networking|device manager]] | |||
# Go to System > Compilation > Compile Active Partition, and make sure all paths are connected properly. | # Go to System > Compilation > Compile Active Partition, and make sure all paths are connected properly. | ||
# Go to System > Network > Send Configuration. | # Go to System > Network > Send Configuration. | ||
Latest revision as of 13:43, 1 September 2020
Sending a Configuration and Connecting
- Before sending a configuration, the existing or default configuration on the Tesira needs to be cleared from the Forte in the device manager
- Go to System > Compilation > Compile Active Partition, and make sure all paths are connected properly.
- Go to System > Network > Send Configuration.
- It will ask us to name the config; give it a name that makes sense.
- Start System Audio: Yes.
- Start All. Close.
We now have a working Tesira Configuration and are live!