Bluetooth Talkback: Difference between revisions
Jump to navigation
Jump to search
IVSWikiBlue (talk | contribs) No edit summary |
IVSWikiBlue (talk | contribs) |
||
| Line 12: | Line 12: | ||
==Installation Instructions== | ==Installation Instructions== | ||
===Mounting the Device=== | |||
#Determine the location where the Bluetooth transmission device. It will need to be mounted within the reach of its power cable. | |||
#*''Note:'' A USB power block will be needed to connect to a power outlet. | |||
#Using a stud finder, scan the mounting location of the Bluetooth device is not mounted on a stud. | |||
#Cut a hole into the drywall, large enough to fit the mud ring into it securely | |||
#Cut a length of 22/2 long enough to reach from the camera to the Bluetooth device. | |||
#Using fish tape or glow rods, pass the 22/2 through the drywall. | |||
#At the camera, connect the 22/2 to the Audio Out port/terminal. | |||
#Using the face plate that will have the Bluetooth device mounted, measure 3/4" to the right of the top screw hole and drill a hole (3/16") for the 3.5mm cable to pass through. | |||
#:[[file]] | |||
#Connect the 3.5 to the 22/2 cable using B connectors. Use electrical tape to cover the splice and ensure that the splice occurs on the side of the face plate that will be in the wall. | |||
#Using a Velcro, attach a 1' square to the back of the device and to the face plate. | |||
#:[[file]] | |||
===Pairing Devices=== | |||
Revision as of 19:59, 12 May 2020
Required Parts and Tools
- Monoprice Premium Bluetooth 5 Transmitter & Receiver
- RDL 24V DC power supply
- 22/2 audio cable
- 18/2 low voltage cable
- B Connectors
- Fish Tape or Glow Rods
- Electrical Tape
- Wire Stripper
Installation Instructions
Mounting the Device
- Determine the location where the Bluetooth transmission device. It will need to be mounted within the reach of its power cable.
- Note: A USB power block will be needed to connect to a power outlet.
- Using a stud finder, scan the mounting location of the Bluetooth device is not mounted on a stud.
- Cut a hole into the drywall, large enough to fit the mud ring into it securely
- Cut a length of 22/2 long enough to reach from the camera to the Bluetooth device.
- Using fish tape or glow rods, pass the 22/2 through the drywall.
- At the camera, connect the 22/2 to the Audio Out port/terminal.
- Using the face plate that will have the Bluetooth device mounted, measure 3/4" to the right of the top screw hole and drill a hole (3/16") for the 3.5mm cable to pass through.
- Connect the 3.5 to the 22/2 cable using B connectors. Use electrical tape to cover the splice and ensure that the splice occurs on the side of the face plate that will be in the wall.
- Using a Velcro, attach a 1' square to the back of the device and to the face plate.