Mounting Instructions: Difference between revisions
Jump to navigation
Jump to search
IVSWikiBlue (talk | contribs) Created page with "==Required Parts and Tools== * Epiphan DVI/HDMI Encoder * (4) 1-1/2" corner mounting brackets (mounting screws included) * M3x20 Phillips pan machine screws * SAE #6 flat wa..." |
IVSWikiBlue (talk | contribs) |
||
| Line 10: | Line 10: | ||
==Installation Instructions== | ==Installation Instructions== | ||
#Determine the mounting location for the encoder. Generally, it will be mounted under a desk or table near the control work station. | |||
#Ensure that the mounting location allows the video cable and Ethernet cables to reach the encoder unit | |||
#Once the location is determined. Measure out the appropriate distance for mounting the four corner brackets | |||
#*3-3/8" between each pair of brackets | |||
#*7" vertically between both pairs | |||
#:[[File:EncoderArmLegnth.JPG|link=https://ipivs.com/wiki/images/3/34/EncoderArmLegnth.JPG]] | |||
Revision as of 18:10, 7 May 2020
Required Parts and Tools
- Epiphan DVI/HDMI Encoder
- (4) 1-1/2" corner mounting brackets (mounting screws included)
- M3x20 Phillips pan machine screws
- SAE #6 flat washers
- Measuring tape
- Level
- Small screwdriver
- Drill and drill bit
Installation Instructions
- Determine the mounting location for the encoder. Generally, it will be mounted under a desk or table near the control work station.
- Ensure that the mounting location allows the video cable and Ethernet cables to reach the encoder unit
- Once the location is determined. Measure out the appropriate distance for mounting the four corner brackets
- 3-3/8" between each pair of brackets
- 7" vertically between both pairs
