Devices and Networking: Difference between revisions

From IVS Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:


[[File:Tesira_Device_Maintenance.png]]
[[File:Tesira_Device_Maintenance.png]]
#Network settings
 
#Clear configuration
#Network settings- click here to set IP's
#Update firmware
#Clear configuration- we will need to do this if we are sending a brand new config to the device
#System ID for Canvas solution
#Update firmware. Plan for this to take between 30-60 minutes
#System ID for user interface configuration
 


===Network Settings===
===Network Settings===


[[File:Tesira_Device_Information.png]]
[[File:Tesira_Device_Information.png]]
#Assign IP’s
 
#Assign IP’s here
#Switch between Control and AVB
#Switch between Control and AVB


===AVB Enable===
===AVB Enable===


[[File:Tesira_Network_Settings.png]]
[[File:Tesira_Network_Settings.png]]
#Click it
 
#If we are using an AVB switch or any ancillary devices, enable AVB here
 


===Device Information===
===Device Information===


[[File:Tesira_Device_AVB_Enable.png]]
[[File:Tesira_Device_AVB_Enable.png]]
#Firmware version
 
#System ID for Canvas solution
#Check the current firmware version
#System ID for user interface configuration

Revision as of 16:58, 21 April 2020

Device Maintenance

  1. Network settings- click here to set IP's
  2. Clear configuration- we will need to do this if we are sending a brand new config to the device
  3. Update firmware. Plan for this to take between 30-60 minutes
  4. System ID for user interface configuration


Network Settings

  1. Assign IP’s here
  2. Switch between Control and AVB


AVB Enable

  1. If we are using an AVB switch or any ancillary devices, enable AVB here


Device Information

  1. Check the current firmware version
  2. System ID for user interface configuration