ROAM Bridge: Difference between revisions
Jump to navigation
Jump to search
IVSWikiBlue (talk | contribs) No edit summary |
IVSWikiBlue (talk | contribs) No edit summary |
||
| Line 26: | Line 26: | ||
==Configure Wireless== | ==Configure Wireless== | ||
{{Aside | hue = 200 | icon = {{book_icon}} | content = To the left of <b>wifi1</b>, you will see a | {{Aside | hue = 200 | icon = {{book_icon}} | content = To the left of <b>wifi1</b>, you will see a button with [E] or [D]. Make sure this is showing a <b>[D]</b>. This means that is is enabled. The letter D is prompting you to disable wifi1.}} | ||
# Select <b>Wireless</b>. | # Select <b>Wireless</b>. | ||
#Click on <b>wifi1</b>. | #Click on <b>wifi1</b>. | ||
Revision as of 16:58, 27 February 2024
ROAM Bridge
Physical Device
Accessing the ROAM Bridge
To access the ROAM Bridge, it must be powered and connected to the network.
✎
You can also access the device by connecting a laptop or computer directly to the deivce.
Once on the network, please navigate to the IP of the bridge, and enter the credentials.
-
The default administrative credentials are:
- User:
- admin
- Password:
- admin51
Configure Wireless
🕮
To the left of wifi1, you will see a button with [E] or [D]. Make sure this is showing a [D]. This means that is is enabled. The letter D is prompting you to disable wifi1.
- Select Wireless.
- Click on wifi1.
- Scroll down to Configuration.
- Under SSID select the wireless network you are going to connect to.
- Continue scrolling down to Security.
- Under Passphrase, enter in the password for the wireless network you selected above.
Locate DHCP Address of the Bridge
- Navigate to IP.
- Click on DHCP Client.
- From there, you will see the IP Address for wifi1.