Devices and Networking: Difference between revisions

From IVS Wiki
Jump to navigation Jump to search
← Older edit
No edit summary
No edit summary
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
===Device Maintenance===
{{Article - Manual | content =  
<h1>Devices and Networking</h1>
Use the following tools to find IP and System settings and Firmware information.


[[File:Tesira_Device_Maintenance.png]]
{{hr}}
 
==Device Maintenance==
 
{{img - resize | file = Tesira_Device_Maintenance_2.png}}


#Network settings- click here to set IP's  
#Network settings- click here to set IP's  
#Clear configuration- we will need to do this if we are sending a brand new config to the device
#Clear configuration- this will need to be done when sending a brand new config to the device
#Update firmware. Plan for this to take between 30-60 minutes
#Update firmware. Plan for this to take between 30-60 minutes. Also update the firmware for any remote devices; this will take about 10 minutes for each device
#System ID for user interface configuration
#System ID for user interface configuration


{{hr}}


===Network Settings===
==Device Information==


[[File:Tesira_Device_Information.png]]
{{img - resize | file = Tesira_Device_Information_2.png}}


#Assign IP’s here
#Check the current firmware version
#Switch between Control and AVB
#System ID for user interface configuration
 
{{hr}}


==Network Settings==


===AVB Enable===
{{img - resize | file = Tesira_Network_Settings_2.png}}


[[File:Tesira_Network_Settings.png]]
#Assign IP’s here
#The Control and AVB ports will each have their own IP's. Switch between Control and AVB here


#If we are using an AVB switch or any ancillary devices, enable AVB here
{{hr}}


==AVB Enable==


===Device Information===
{{img - resize | file = Tesira_Device_AVB_Enable.png}}


[[File:Tesira_Device_AVB_Enable.png]]
#If using an AVB switch or any ancillary devices, enable AVB here
}}


#Check the current firmware version
[[Category:AVB]]
#System ID for user interface configuration

Latest revision as of 22:15, 24 March 2025

Devices and Networking

Use the following tools to find IP and System settings and Firmware information.

Device Maintenance

  1. Network settings- click here to set IP's
  2. Clear configuration- this will need to be done when sending a brand new config to the device
  3. Update firmware. Plan for this to take between 30-60 minutes. Also update the firmware for any remote devices; this will take about 10 minutes for each device
  4. System ID for user interface configuration

Device Information

  1. Check the current firmware version
  2. System ID for user interface configuration

Network Settings

  1. Assign IP’s here
  2. The Control and AVB ports will each have their own IP's. Switch between Control and AVB here

AVB Enable

  1. If using an AVB switch or any ancillary devices, enable AVB here
Retrieved from "https://ivs.help/wiki/index.php?title=Devices_and_Networking&oldid=15544"