View source for Installing Overhead Speaker on Axis Cameras with Phoenix Connector

==Required Parts And Tools==

* Axis P5414-E [[File:P54.jpg|100x100px]]
* Amplified Overhead Speaker (Any speaker will due, however, we recommend the OWI-AMPR2SIC5 and will be the speaker referenced in these instructions)[[File:In Ceiling Speakers.jpg|120x160px]]
* 22/2 audio cable [[File:Stripped 22 2 Wire.JPG|60x80px]]
* Fish Tape or Glow Rod [[File:15-4-57-m-mid-flex-glow-rod-set-tools-to-k56415-to-k56415-19671-228x228.jpg|60x80px]]
* Electrical Tape
* Wire Stripper [[File:Wire Stripper and Starbit Driver.JPG|60x80px]]

==Installation Instructions==

#Once your camera is installed, locate the AUDIO OUT on your P5414E.
#Strip the jacket of the 22/2 cable revealing the red, black, and bare wires inside. Cut away the plastic surrounding the cable inside. Strip away a small piece of the red and black jackets revealing the bare copper wire.
#Wire the black and bare to the - and the red to the + of the AUDIO OUT of the P5414E phoenix connector.
#In this step, you want to run your 22/2 cable from the camera to your AMP2SIC5, wiring your red wire to the + phoenix connection and black to the - connection of the LINE INPUT of the AMP2SIC5 (See pics).
#Once audio is plugged in, locate your run 18/2 from the AMP2SIC5 to its designated power outlet. Test the talkback unit is working by activating the talkback function within the Valt Software by having a partner use their computer microphone to communicate with you.

[[File:Talkback Turn On.jpg|720x960px]]