View source for Add iPad to VALT

<div class="section">
1) Go to the <b>Admin</b> section and click <b>Rooms & Cameras</b>
<br>
2) Click on <b>Add Device</b>
</div>
<br>
{{img with key | file = VALT Add Device.png | list =
<li><b>Rooms & Cameras:</b> Clicking this will open the list of rooms and devices.</li>
<li><b>Add Device:</b> Clicking this will allow you to enter information for a new device.</li>
}}

<br>
<div class="section">
3) Fill out the appropriate information for the device you are adding.
</div>
<br>

{{img with key | file = VALT Add Device Info.png | list =  
<li><b>Name:</b> You should give the device a unique name that is easily identifiable.</li>
<li><b>Type:</b> This area allows you to select the type of device you are adding.</li>
<li><b>Rooms:</b> This is where you can select the room for the iPad. Most iPads are used in many different rooms. It is recommended to create a separate room for each mobile device.</li>
<li><b>Media Server:</b> This area allows you to select the server that will store the recorded video. In many cases, localhost is used.</li>
}}

<br>
<div class="section">
4) Click <b>Save</b>
<br>
5) Expand the room you added the device to, and click on the device. 
</div>
<br>

{{img with key | file = Rooms and Cameras Expand.png | list =  
<li>The + symbol is used to expand to show the devices in a room.</li>
<li>Devices in the room.</li>
}}


{{img with key | file = VALT BEAM Info 1.png | list =  
<li><b>Device UID:</b> This ID is used to sync the device with VALT.</li>
<li><b>Link Status:</b> This area shows if the device is linked to VALT.</li>
<li><b>Status:</b> This area indicates if the device is currently streaming and connected to VALT.</li>
}}

{{img with key | file = VALT BEAM Info 2.png | list =  
<li><b>Name:</b> Displays the current name, and allows you to change it.</li>
<li><b>Type:</b> Displays the current device type, and allows you to change it.</li>
<li><b>Rooms:</b> Displays the current Room/Rooms the device is in, and allows you to change it.</li>
<li><b>Media Server</b> Displays the current server the device is storing videos to, and allows you to change it.</li>
}}
[[Category:BEAM]]