View source for Biamp Tesira Forte

{{Article - Manual | title = {{PAGENAME}} | content = 
<h1>Introduction</h1>
This is a training and resource page for building software DSP configurations and physical wiring. This is not meant to replace official training certification; this is meant only for those who have completed and passed the Tesira online training certification. This resource contains examples and build guides specific to IVS use cases. 

{{hr}}

==Biamp Devices==

* [[IVS Supported Biamp Hardware]] 
* [[Devices and Networking|Setting up Devices in Tesira]]
* [[Notes about AVB|Notes about AVB devices]]

{{hr}}

==Tesira Software Configurations==

* [[Simple Configuration|Simple Configuration]]
* [[2 x 2 Configuration|2 x 2 Configuration]]
* [[Observation Room Audio Solution|Observation Room Audio Solution]]
* [[Control Room Audio Solution|Control Room Audio Solution]]
* [[Multiple Devices Configuration|Multiple Devices Configuration]]
* [[Speaker Selector Configuration|Speaker Selector Configuration]]
* [[Microphone Selector Configuration|Microphone Selector Configuration]]

{{hr}}

==Biamp Canvas User Interface Configurations==
* [[Canvas Settings|Canvas Settings]]
* [[User Interface Speaker Selector|User Interface Speaker Selector]]
* [[User Interface Microphone Selector|User Interface Microphone Selector]]

{{hr}}

==Audio Processing and AEC==

* [[EQ Processing|EQ Processing]]
* [[Compression Settings|Compression Settings]]
* [[Acoustic Echo Cancellation|Acoustic Echo Cancellation]]

{{hr}}

==Sending a Configuration to the System==
* [[Sending a Configuration to the System|Sending a Configuration to the System]]

{{hr}}

==Training Exercises==

* [[Training Exercise 1|Training Exercise 1]]
* [[Training Exercise 2|Training Exercise 2]]
* [[Training Exercise 2|Training Exercise 3]]
* [[Training Exercise 4|Training Exercise 4]]
}}